lihlahisoa
XDB305 Φ22mm tšepe e sa jeleng paate e fetisang khatello
Likaroloana
● Mehaho eohle e tiileng ea tšepe e sa hloekang.
● Boholo bo bonyenyane le bo kopanetsoeng.
● Ts'ebetso e felletseng ea ts'ireletso ea matla a ho phahama.
● Litharollo tsa theko e tlase le tsa maemo a holimo.
● Fana ka OEM, mokhoa o feto-fetohang.
● bolelele ba thapo ea limithara tse 2 ka mokhoa oa kamehla.
● Moralo oa leqhutsu botlaaseng ba khoele.
● E matla, e monolithic, tekanyo ea theko ea ts'ebetso e phahameng ka ho nepahala ho phahameng, ho tiea, le tšebeliso e tloaelehileng.
● E hana ho bola, leha e le sebakeng se pepesehileng lik'hemik'hale le se mongobo.
● Teko ea ts'ebetso e kopantsoeng ka "live zero".
● E mamella meroalo e fihlang ho makhetlo a 1.5 khatello ea eona ea lebitso (e lekantsoeng).
● Bopaki ba ho tšoha ha lits'ebetso tse nang le lithothokiso (ho latela DIN IEC68).
● E ka tšeptjoa ebile e manganga ka lebaka la 'mele oa eona oa ho metha oa tšepe e sa hloekang le tlhahlobo e bonolo ea ts'ebetso.
Lisebelisoa tse Tloaelehileng
● IoT e bohlale ea khatello ea kamehla ea metsi.
● Mechine ea boenjiniere, taolo ea ts'ebetso ea indasteri le tlhokomelo.
● Mekhoa ea ho hloekisa matla le metsi.
● Tšepe, indasteri e bobebe, tšireletso ea tikoloho.
● Mechini ea bongaka, ea temo le lisebelisoa tsa tlhahlobo.
● Thepa ea ho lekanya phallo.
● Lisebelisoa tsa ho laola metsi le moea oa moea.
● Setsi sa moea le thepa ea sehatsetsi.
● Tlhokomelo ea khatello ea pompo ea metsi le moea oa compressor.
Tekheniki Parameters
| Mokhahlelo oa khatello | -1 ~ 0 ~ 600 bar | Ho tsitsa nako e telele | ≤± 0.2% FS / selemo |
| Ho nepahala | | Nako ea ho arabela | ≤3ms |
| Matla a kenyang | | Khatello e feteletseng | 150% FS |
| Letšoao la tlhahiso | | Khatello e phatlohileng | 300% FS |
| Khoele | G1/4, NPT1/4 | Bophelo ba potoloho | 500,000 makhetlo |
| Sehokelo sa motlakase | Hirschmann DIN43650C, tse ling | ||
| Mocheso oa ho sebetsa | -40 ~ 105 ℃ | Sehlopha sa tšireletso | |
| Mocheso oa matšeliso | -20 ~ 80 ℃ | ||
| Ts'ebetso ea hona joale | ≤3mA | Sehlopha sa bopaki ba ho phatloha | Exia II CT6 |
| Boemo ba mocheso (zero&sensitivity) | ≤±0.03%FS/ ℃ | Boima ba 'mele | ≈0.25kg |
| Insulation resistance | >100 MΩ ho 500V | ||
Ho Odara Boitsebiso
Mohlala XDB305- 0.6M - 01 - 2 - A - G3 - W5 - b - 03 - Oli
| 1 | Mokhahlelo oa khatello | 0.6M |
| M(Mpa) B(Bar) P(Psi) X(Ba bang ka kopo) | ||
| 2 | Mofuta oa khatello | 01 |
| 01(Gauge) 02(Absolute) | ||
| 3 | Matla a phepelo | 2 |
| 0(5VCD) 1(12VCD) 2(9~36(24)VCD) 3(3.3VCD) X(Tse ling ka kopo) | ||
| 4 | Letšoao la tlhahiso | A |
| A(4-20mA) B(0-5V) C(0.5-4.5V) D(0-10V) E(0.4-2.4V) F(1-5V) G(I2C) X(Tse ling ka kopo) | ||
| 5 | Kgokelo ya kgatello | G3 |
| G1(G1/4) G2(G1/8) G3(G1/2) N1(NPT1/8) N2(NPT1/4) N3(NPT1/2) M1(M20*1.5) M2(M14*1.5) M3(M12*1.5) M4(M10*1) X(Tse ling ka kopo) | ||
| 6 | Khokelo ea motlakase | W5 |
| W1(Gland direct cable) W2(Packard) W3(M12-3Pin) W4(M12-4Pin) W5(Hirschmann DIN43650C) W7(thapo ea polasetiki e tobileng) X (Tse ling ka kopo) | ||
| 7 | Ho nepahala | b |
| a(0.2% FS) b(0.5% FS) X(Tse ling ka kopo) | ||
| 8 | Cable e kopantsoeng | 03 |
| 01(0.3m) 02(0.5m) 03(1m) X(Tse ling ka kopo) | ||
| 9 | Moeta-pele oa khatello | Oli |
| X(Ka kopo hlokomela) | ||
Lintlha:
1) Ka kopo, hokela transmitter ea khatello ho khokahanyo e fapaneng bakeng sa sehokelo se fapaneng sa motlakase.
Haeba li-transmitters tsa khatello li tla le cable, ka kopo sheba 'mala o nepahetseng.
2) Haeba u na le litlhoko tse ling, ka kopo ikopanye le rona 'me u ngole lintlha ka tatellano.
