lihlahisoa
XDB407 High Accuracy Pressure Transducer
Lisebelisoa tse Tloaelehileng
● Phepelo ea metsi e nang le khatello e sa feleng ea loT e bohlale.
● Mekhoa ea ho hloekisa matla le metsi.
● Tšepe, indasteri e bobebe, tšireletso ea tikoloho.
● Pompo ea metsi, tlhokomelo ea khatello ea moea ea compressor.
● Mechini ea bongaka, ea temo le lisebelisoa tsa tlhahlobo.
● Thepa ea ho lekanya phallo.
Likaroloana
XDB407 letoto le phahameng la ho nepahala ha khatello ea transducer e na le mefuta e fapaneng ea mefuta ea khokahano.Sensor ea khatello ea XDB407 e ikhethileng e loketse haholo kalafo ea metsi.Ho feta moo, re na le sehlopha sa ts'ireletso sa IP65 le IP67 seo u ka khethang ho sona.
● E sebelisoa ka ho khetheha bakeng sa ho hloekisa metsi.
● Litharollo tsa theko e tlase le tsa moruo.
● Mehaho eohle ea tšepe e sa hloekang, e nyenyane le e nyenyane.
● Ho nepahala ho phahameng 0.5%.
● Fana ka OEM, mokhoa o feto-fetohang.
● Ka sephahla se senyenyane / damper / liphallelo ka hare, ka katleho fokotsa khatello ea hang-hang e bakoang ke ho phalla ha metsi kapa moea.
Tekheniki Parameters
| Mokhahlelo oa khatello | 0 ~ 10 bar / 0~ 16 bar / 0 ~ 25 bar | Ho tsitsa nako e telele | ≤± 0.2% FS / selemo |
| Ho nepahala | ± 0.5% FS | Nako ea ho arabela | ≤3ms |
| Matla a kenyang | DC 9~36(24)V | Khatello e feteletseng | 150% FS |
| Letšoao la tlhahiso | 4-20mA(2 terata) | Khatello e phatlohileng | 300% FS |
| Khoele | G1/4 | Bophelo ba potoloho | 500,000 makhetlo |
| Sehokelo sa motlakase | Hirschmann(DIN43650C) M12(3PIN)/Cable e otlolohileng ea Gland | Thepa ea matlo | 304 Tšepe e sa hloekang |
| Mocheso oa ho sebetsa | -40 ~ 85 C | Sehlopha sa tšireletso | IP65/IP67 |
| Mocheso oa matšeliso | -20 ~ 80 C | ||
| Ts'ebetso ea hona joale | ≤ 3mA | Sehlopha sa bopaki ba ho phatloha | Exia II CT6 |
| Ho hoholeha ha mocheso (zero&sensitivity) | ≤±0.03%FS/ C | Boima ba 'mele | ≈0.25kg |
Ho Odara Boitsebiso
E .g .X D B 4 0 7 - 1 6 B - 0 1 - 2 - A - G 1 - W 3 - b - 0 1 - W a t e r
| 1 | Mokhahlelo oa khatello | 16B |
| M(Mpa) B(Bar) P(Psi) X(Ba bang ka kopo) | ||
| 2 | Mofuta oa khatello | 01 |
| 01(Gauge) 02(Absolute) | ||
| 3 | Matla a phepelo | 2 |
| 0(5VCD) 1(12VCD) 2(9~36(24)VCD) 3(3.3VCD) X(Tse ling ka kopo) | ||
| 4 | Letšoao la tlhahiso | A |
| A(4-20mA) B(0-5V) C(0.5-4.5V) D(0-10V) E(0.4-2.4V) F(1-5V) G(I2C) X(Tse ling ka kopo) | ||
| 5 | Kgokelo ya kgatello | G1 |
| G1(G1/4) G2(G1/8) G3(G1/2) X(Tse ling ka kopo) | ||
| 6 | Khokelo ea motlakase | W3 |
| W1(Gland direct cable) W3(M12(3PIN)) W5(Hirschmann DIN43650C) X(Tse ling ka kopo) | ||
| 7 | Ho nepahala | b |
| b(0.5% FS) c(1.0% FS) X(Tse ling ka kopo) | ||
| 8 | Cable e kopantsoeng | 01 |
| 01(0.3m) 02(0.5m) 05(3m) X(Tse ling ka kopo) | ||
| 9 | Moeta-pele oa khatello | Metsi |
| X(Ka kopo hlokomela) | ||
Lintlha:
1) Ka kopo, hokela transmitter ea khatello ho khokahanyo e fapaneng bakeng sa sehokelo se fapaneng sa motlakase.Haeba li-transmitters tsa khatello li tla le cable, ka kopo sheba 'mala o nepahetseng.
2) Haeba u na le litlhoko tse ling, ka kopo ikopanye le rona 'me u ngole lintlha ka tatellano.
